.

.

.



F350

Engine Type 60° V8 DOHC 32-valve
Displacement 5330cc (5.3L)
Bore x Stroke 94 x 96mm (3.70 x 3.78 in.)
Prop Shaft Horsepower 350hp at 5500 rpm
Compression Ratio 9.6:1
Fuel Induction EFI/DOHC
Exhaust In-Bank™ dual exhaust with Power Surge Chambers
Intake Single Throttle Valve
Ignition TCI, 32-bit ECM with integrated coil-in-cap ignition design
Spark Plug LFR6A-11
Alternator Output 50 Amp
Starting System Electric
Lubrication Wet Sump
Engine Oil Capacity 6.5L/6.3L without Filter
Full Throttle RPM Range 5000 ~ 6000 rpm
Cooling Water/Thermostatic Control
Recommended Engine Oil Yamalube® 4M (See owner's manual)
Recommended Fuel Regular Unleaded (Minimum Pump Octane 89)
Recommended Fuel Filtration Yamaha 10-Micron Fuel/Water Separating Filter (external)
Ethanol Blend Limit 10% Maximum
Gear Ratio (26:15) 1.73:1
Gear Shift Forward, Neutral, Reverse
Shaft Length X = 25" U = 30"
Degree of Tilt 67°
Degree of Trim -3° through +16°
C.A.R.B. Rating 3-Star
Dry Weight 25" shaft / 346 kg (763 lbs), 30" shaft / 354 kg (780 lbs)
Mounting Centers 28.5"
Steering Angle (maximum) 32° from center, either direction
Warranty 3-Year Pleasure, 3-Year Government, 1-Year Commercial
Comparison Image

Yamaha V8 Offshore Range Description

Deliberately designed to withstand the harsh demands of a marine environment, the V8 F350 features:

Wave-Crushing Power
The world’s first 5.3-liter four stroke outboard, the F350 provides unparalleled displacement and up to 45% more thrust than 250hp-class outboards. When it launched in 2007, its industry-rocking 60° DOHC, and 32-valve, 5.3-liter design redefined offshore power. It’s taken almost five years for the competition to even remotely catch up.

Deep-Water Durability
To handle the incredible power of the F350, its Ultra-Tough Gearcase features hardened gears and high-strength, oversized bearings and bearing surfaces. It also features strong, forged motor mounts and an oversized bracket specifically designed to harness its massive power and thrust while minimizing vibration and noise.

Corrosion Resistance
Saltwater wreaks havoc on metal engine components. Our Ultimate Corrosion Protection System (UCP II™) places sacrificial anodes throughout the powerhead, mid-section and lower unit, diverting corrosion away from vital engine components.           

Fuel Efficient Design
Burning just 31.7 gal/hr @ 6000 RPM (depending on application), the F350 offers incredible fuel efficiency for such an unbelievable Ultra Low Emissionamount of power. This comes in handy when you’re putting hundreds of miles on in a day.

Intuitive Control
Harness the power of the V8 F350 with the Helm Master® fully integrated boat control system. It supports twin-, triple- and quad-outboard configurations, and makes docking and maneuvering a large offshore boat—even those exceeding 40 feet—very intuitive.

Contact US
441-295-3333
Facebook twitter Email Us